Inch cam follower(inch stud type track roller), eccentric, crowned OD, screwdriver slot, unsealed, CCFE-3, CREC-48, CS-96-X
| D | 76.2 mm | Outside diameter |
| d | 31.75 mm | Stud diameter |
| B | 108.7 mm | Overall width |
| C | 44.45 mm | Outer ring width |
| B1 | 63.5 mm | Length shank on stud |
| B2 | 15.875 mm | Distance lubrication hole to flange ring |
| C1 | 0.7938 mm | Distance face outer ring to face thrust washer |
| d1 | 53.98 mm | Outside diameter flange ring |
| G | 1 1/4-12 | Thread stud |
| G1 | 31.75 mm | Thread length |
| M | 6.35 mm | Seat diameter for lubrication accessories |
| M1 | 3.175 mm | Diameter of lubrication hole (shank) |
| SW | 19.05 mm | Width across flats |
| de | 44.45 mm | Eccentric collar outside diameter |
| B1 | 31.75 mm | Eccentric collar width |
| e | 1.524 mm | Eccentricity |
| r min | 3.18 mm | Chamfer dimension outer ring |
| Fr | 69923 kN | Maximum dynamic radial load |
| F0r | 110800 kN | Maximum static radial load |
| nD G | 950 r/min | Limiting speed |
| ≈m | 1.91 kg | Weight |
| Crowned | Outer ring profile | |
| Full complement roller | Roller guide | |
| Centric stud with eccentric collar | Stud type | |
| Gap type | Sealing type | |
| 52100 | 100Cr6 | Outer ring material | |
| 52100 | 100Cr6 | Roller material | |
| 20CrMo (ASTM4118, SCM420) | Stud material | |
| Lithium Soap Grease NLGI #2 | Grease |
| Screwdriver slot | Mouting hole | |
| 1/4” Alemite Fitting | Grease fitting | |
| 389.85 Nm | Recommended tightening torque |
| -30ºC to + 120ºC | Temperature range °C | |
| -22ºF to + 250ºF | Temperature range °F |
| Mc.GILL | Torrington・Koyo・NSK | RBC | INA・SKF | SMITH | Carter |
| CCFE-3 | CREC-48 | CS-96-X | CFE-48-Y | CR-3-EC | CCNBE-96 |
